Description
Pixelcade LCD software only for DIYers, you’ll need to purchase on your own:
- LCD Bar Display – 14.9″ (1280 x 390 resolution) or 24″ or 28″ in 1920 x 360 resolution *
- Orange Pi Zero 2 or Orange Pi Zero 3
- USB-C charging cable and adapter (for the Orange Pi Zero 2 or 3)
- 64 GB microSD card + SD card adapter
- 2 ft microHDMI to HDMI cable (to connect the Orange Pi Zero 2 or 3 to the LCD controller board HDMI input)
* The 14.9″ VSDISPLAY on Amazon is compatible.
We’ll then send you a Google Drive download link containing the Pixelcade Software image which you’ll then burn onto the 64 GB microSD card using Balena Etcher and then follow the Pixelcade LCD setup instructions ==> https://pixelcade.org/lcdgen3/
Please also include a gmail id in the order notes which we’ll use to share the Google Drive link to you.
Please note that the Pixelcade LCD software DOES NOT run on a Raspberry Pi and only runs specifically on the Orange Pi Zero 2 or Orange Pi Zero 3 hardware and will not run on other Orange Pi boards.
